Datasheet4U Logo Datasheet4U.com

MAX14661 - Beyond-the-Rails 16:2 Multiplexer

Description

The MAX14661 is a serially controlled, dual-channel analog multiplexer allowing any of the 16 pins to be connected to either common pin simultaneously in any combination.

Features

  • Beyond-the-RailsTM capability so that ±5.5V signals can be passed with any single supply between +1.6V and +5.5V. The serial control is selectable between I2C and SPI. Both modes provide individual control of each independent switch so that any combination of switches can be applied. I2C mode provides two address-select pins allowing for addressing up to four devices on a single bus. The SPI mode includes a DOUT pin that can be used to chain multiple devices together with a single select signal.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX14663 Portable Medical Power Management Analog Devices
MAX146 +2.7Low-Power / 8-Channel / Serial 12-Bit ADCs Maxim
MAX1460 Low-Power / 16-Bit Smart ADC Maxim
MAX1462 Low-Voltage / Low-Power / 16-Bit Smart ADC Maxim
MAX14626 High-Voltage Reverse-Input-Capable Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX14662 Beyond-the-Rails SPST
MAX14667 Dual USB Charger Adapter Emulator
MAX14606 Overvoltage Protectors
MAX14607 Overvoltage Protectors
MAX14611 Quad Bidirectional Low-Voltage Logic-Level Translator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX14661 EVALUATION KIT AVAILABLE Beyond-the-Rails 16:2 Multiplexer General Description The MAX14661 is a serially controlled, dual-channel analog multiplexer allowing any of the 16 pins to be connected to either common pin simultaneously in any combination. The device features Beyond-the-RailsTM capability so that ±5.5V signals can be passed with any single supply between +1.6V and +5.5V. The serial control is selectable between I2C and SPI. Both modes provide individual control of each independent switch so that any combination of switches can be applied. I2C mode provides two address-select pins allowing for addressing up to four devices on a single bus. The SPI mode includes a DOUT pin that can be used to chain multiple devices together with a single select signal.
Published: |